Uninet 4300 17” DTF Printer (Includes Training, Starter Bundle, 1 Year Warranty)

The UNINET™ DTF 4300 system features:

• Accepts DTF rolls up to 17” wide
• Vacuum-enhanced printing area for better ink adhesion and avoidance of film buckling
• Print speed: up to 44 – 50 square ft / hr (~20 A2 pages / hr)
• WICS (White Ink Circulation System) to minimize clogging
• Dual Industrial, high definition printheads
• Continuous XL Ink Tank Feed System
• Humidity Sensor
• Driver Software
• RIP Software Included (Built-in Ethernet Port on PC is Required)
• Full automation capable when bundled with a shaker

• Printer Dimensions:
  • Uncrated – 53″ x 35″ x 53 / 135cm x 90cm x 135cm – 286lbs / 130kg
  • Crated – 67” x 32” x 23” / 170cm x 81cm x 84cm – 375lbs /170kg
• Printer may be purchased alone, or choose between either a ‘Horizonal’ shaker or “Vertical‘ SLIMSHAKER’ In-line, automated powder application and curing machines.

Incredible overall value!

12 Month Warranty: UNINET™ offers a 12 month warranty which pertains to replacement of faulty materials during the first year from the date of purchase of the machine (except for damage caused by the user, or other circumstances that does not depend on manufacturing defects, including lack of maintenance and clogs). Consumable parts are excluded from the warranty, including but not limited to: Ink, print heads, capping stations, dampers and waste bottles (except in cases where the product is DOA). The warranty does not extend to any UNINET™ Hardware Product from which the serial number has been removed or that has been damaged or rendered defective as a result of accident, misuse, liquid spills, abuse, contamination, improper or inadequate maintenance or calibration, or other external causes (such consumable parts are available as spare parts if needed). This includes all electronic boards, cables, power supplies and the like – liquid or ink spills of any kind that can short one or all of these items. Lack of use for more than a day or two can cause the ink to clog and lead to longer maintenance cycles, possible print defects and need to replace a consumable that is not covered under warranty.

Included with the system:

• World Class Service and Support direct from UNINET™
• DTF Inks (CMYKW) – 1000ml bottles
• 328 ft roll DTF Transfer paper
• DTF Adhesive Powder (aka Transfer Powder) – 2x 1.75lb bottles
• DTF Starter Bundle (Hygrometer, Maintenance Solutions and Accessories)
• UNINET™ DTF ProRIP Software
• 2 hour virtual onboarding

What’s NOT Included but you will need:

• Windows 10 or higher PC with an available network port. If a network port is not available, a separate USB gigabit ethernet adapter will need to be purchased
• Heat press for finishing (curing) the final print to your garment – We recommend a 16×20 heat press
• 5 small funnels (for ink filling)
• Humidifier (to keep the humidity above 50% in the print room)
• Air purifier / Fume extractor for curing process

The price of this item includes onboarding and training. If you find that you will need more support to get set up and operational, it will be provided upon request. Because this printer is ink based, it requires continual use. Lack of use for more than a day or two, or non-adherence to maintenance or cleaning procedures can cause the ink to clog and lead to longer maintenance cycles or possible print defects.

WARNING: OPERATE IN A WELL-VENTILATED AREA and use protective equipment when working with DTF products and processes. UNINET™® highly recommends the use of a fume extractor to handle the fumes caused by TPU adhesive powder curing. We recommend body protection, including the use of PPE equipment such as a full body covering, a respirator or N95 mask, goggles, and gloves, to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user’s sole risk. DTF equipment is intended for use in a commercial environment. UNINET™ does not recommend the use of DTF equipment in a residential or in-home setting. For DTF inks and film, we highly recommend a humidity environment of over 50% to minimize the risk of ink clogs and film buckling.

Included:

• Uninet 4300 17” DTF Printer
• World Class Service and Support direct from UNINET™
• DTF Inks (CMYKW) – 1000ml bottles
• 328 ft roll DTF Transfer paper
• DTF Adhesive Powder (aka Transfer Powder) – 2x 1.75lb bottles
• DTF Starter Bundle (Hygrometer, Maintenance Solutions and Accessories)
• UNINET™ DTF ProRIP Software
• 2 Hour Virtual Onboarding
• 1 Year Warranty
• UNINET® DTF 17 in Automated Powder Application and Curing Machine 220V