Matsui WS0562 Simple White – Versatile Direct Print And Mixing Base Designed For Performance And High-Stretch Fabrics.

Matsui WS0562 Simple White Application:

• Screen Mesh: Print through fine mesh screens up to 160/inch (63/cm).
• Curing: Cure at 320°F (160°C) to achieve the softest prints in textile screen printing.
• Suitable Fabrics: Ideal for light, medium, and dark fabrics, including cotton and polyester.

Special Recommendations:

• Clean Mixing: Use clean vessels and utensils to avoid contamination.
• Additives:
  • Retarder MG: 1-5% to extend open time in the screen.
  • Fixer WF-N: 1-5% to enhance wash fastness.
  • Softener MG: 1-4% to help ink penetrate the garment.
  • Thickener B: 0.25-1% to adjust ink thickness.
  • RV Additive: 1-3% to reduce viscosity.
• Ironing and Dry Cleaning: Prints can be dry cleaned or ironed without issue.

Technical Data Sheet:

• Wet Ink Tack: Low
• After Flash Tack: Low
• Printability: Excellent
• Surface Appearance: White
• Opacity/Viscosity: Excellent/Low
• Bleed Resistance: None
• Flash Temperature: 160°F (71°C), decreases with deposit thickness
• Cure Temperature: 320°F (160°C)
• Squeegee Hardness: Medium
• Squeegee Blade: Sharp
• Squeegee Angle: 45 degrees
• Squeegee Speed: Medium
• Underlay: Excellent
• Emulsion: Direct or indirect
• Mesh Count: 86-160/inch (34-63/cm)
• Thinner: RV Additive
• Thickener: Thickener B
• Storage: 65°F to 95°F (18°C to 35°C), avoid direct sunlight.
• Cleanup: Water and mild soap or detergent
• Color Range: White
• Substrate Type: Cotton and Polyester
• Substrate Colors: Light, Medium, and Dark Fabrics

Matsui Simple Clear & White is an ideal choice for screen printers looking for a cost-effective, eco-friendly solution that delivers vibrant, durable prints with a soft hand feel and excellent elasticity. Its versatility and ease of use make it a valuable addition to any printing operation.

Matsui Simple Clear & White Technical Data Sheet